TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 109 / 312

Operation
07/05/2018 109
7.10.2 Automatic bracing
1. Switch on the machine ( Ä Chapter 7.3 „Switching the machine on/off”, on page
73).
2. Move the basket boom and working basket into the work position ( Ä Chapter
7.8 „Moving the working basket into the work position (optional)”, on page 98).
3. Move the outriggers into the desired work position (
Ä
Chapter 7.9 „Moving the
bracing into the work position”, on page 101).
1
2
Fig. 132
4. Set the function selector on the radio control to [bracing function] (yellow)
(Fig.132/2).
WARNING
Risk of injury from uneven lifting or lowering the machine!
Due to uneven lifting and lowering, the machine can tip or slide. This can cause
severe injuries and significant material damage.
– If the machine begins to list during lifting or lowering, immediately stop the
process and realign the machine manually.
– Have the automatic bracing checked by service staff.
5. Use the control lever (Fig.132/1) to operate the outriggers as per the following
table.
Operating element Symbol Effect
Control lever (Fig.132/1)
AUTO
Outriggers 1, 2, 3 and 4 extend
AUTO
Outriggers 1, 2, 3 and 4 retract