TEUPEN LEO 27T, Translation Of The Operating Instructions

Page: 212 / 312

Faults
212
07/05/2018
Fault description Cause Remedy Staff
The diesel engine does not
work Fuel tank empty. Fill the fuel tank. Trained persons
Safety equipment has
triggered (fuse, FI circuit
breaker). Check the safety equip-
ment and reactivate or re-
place as necessary
(
Ä
Chapter 9.4 „Changing
fuses or circuit breakers”,
on page 222).
Trained persons
Starter battery flat. Charge the starter battery
(
Ä Chapter 7.26 „Charging
the main battery”, on page
172).
Trained persons
Emergency stop button
pressed. Unlock the emergency stop
button
(
Ä
Chapter 3.6 „Safety
equipment”, on page 28).
Trained persons
The machine does not work
with the voltage supply
from the construction site
supply point Safety equipment has
triggered (fuse, FI circuit
breaker). Check the safety equip-
ment and reactivate or re-
place as necessary
(
Ä
Chapter 9.4 „Changing
fuses or circuit breakers”,
on page 222).
Trained persons
Extension cable faulty. Replace the extension
cable. Trained persons
Incorrect cable cross-sec-
tion or incorrect cable
length. Adhere to permissible cable
length(s) and cable cross-
section (
Ä
Chapter 7.2
„Connecting the machine to
the mains supply”, on page
71).
Trained persons
Emergency stop button
pressed. Unlock the emergency stop
button (
Ä
Chapter 3.6
„Safety equipment”, on
page 28).
Trained persons
Operation cannot be per-
formed from the lower con-
troller. Key switch in working bas-
ket set to “I”; emergency
stop button pressed. Set key switch in working
basket set to “0”; unlock
emergency stop button
(
Ä
Chapter 3.6 „Safety
equipment”, on page 28).
Trained persons
The platform function can-
not be operated from the
working basket Key switch in working bas-
ket set to “0”. Set key switch in working
basket to "I". Trained persons
Emergency stop button
pressed. Unlock the emergency stop
button (
Ä
Chapter 3.6
„Safety equipment”, on
page 28).
Trained persons
Bracing not correct. Brace the machine cor-
rectly (
Ä
Chapter 7.10 „Op-
erating the bracing”, on
page 106).
Trained persons
The crawler tracks cannot
be driven. The switch position on the
cable remote control or the
control panel is incorrect. Set the toggle switch to the
crawler function position
(
Ä
Chapter 7.6 „Driving the
machine”, on page 87).
Trained persons