Tetra Pak HOYER COMET N, Manual

Page: 70 / 151

6-16
Tetra Pak
Hoyer
CN 03 F A 01
Fig. E.2
1
2
3
4
5
This device, fitted below the shutters and driven
by a mechanical cam, supports the pushers that
eject the cones.
The lifting movement enables the ejectors (Part
1, Fig. E.2) to lift the cones of the shutters, place
them on the discharge conveyor (Part 2, Fig.
E.2) by means of ejection curves (Part 3, Fig.
E.2) and send them to the discharge.
Adjustments
Adjust the position of the ejection curves (Part
3, Fig. E.2), on the discharge plate (Part 4, Fig.
E.2) and on the product conveyor, so that the
cone does not interfere with the above-described
components during ejection.
It is possible to adjust the angle of ejection curves
(Part 3, Fig. E.2) and the fixing screw (Part 5,
Fig. E.2) to facilitate the correct positioning of
the cone on the conveyor.
6.1.15 Cone ejection station Replacements for size changes
If the cone size is different from the previous one
at the time the size is changed, it is sometimes
necessary to change the ejection curves (Part 3,
Fig. E.2) that push the product on the conveyor,
along with the diameter and shape of the ejection
plates (Part 4, Fig. E.2)) and set the position of
the conveyor along the longitudinal axis in order
to improve the conveyance of the cup.
For a correct identification of the components,
see the catalogue of spare parts.