Tetra Pak HOYER COMET N, Manual

Page: 60 / 151

6-6
Tetra Pak
Hoyer
CN 03 F A 01
Fig. B.5
6
4
1
5
7
2
1
3
8
9
6.1.5 Dispenser Handling Station
The filling of the containers with ice cream takes
place through time elapse fillers assembled on a
mobile frame.
The handling of the mobile frame (Pos. 1, Fig.
B.5) is achieved by an articulated quadrilateral
(Pos. 2, Fig. B.5) controlled by a cam (Pos. 3,
Fig. B.5).
The articulated quadrilateral is connected to two
pneumatic actuators.
The function of the actuator (Pos. 4, Fig. B.5). is
to get the drive roller (Pos. 5, Fig. B.5) adhere to
the cam (when deactivated, the motion of the
mobile frame stops).
The function of the actuator (Pos. 6, Fig. B.5) is
that of bearing the mobile frame load during the
upward stroke (the pressure of the actuator can
be adjusted by means of a governor (Pos. 7, Fig.
B.5)).
During the downward stroke the pneumatic
actuator
(Pos. 6, Fig. B.5) is connected when discharging
by a release pneumatic valve which makes the
motion of the mobile frame much smoother.
The position of the mobile frame can be adjusted
in height by loosening the screw nut (Pos. 8, Fig.
B.5) with the wrench and by acting on the tie rod
((Pos. 9, Fig. B.5).
Tighten the screw nut (Pos. 8, Fig. B.5) with the
wrench at the end of the operation.