Tetra Pak HOYER COMET N, Manual

Page: 33 / 151

5-13
Tetra Pak
Hoyer
CN 03 E A 01
DATA SETTING
CODE : B
DESCRIPTION : CONO2
1/22
New index ? (Enter =Yes Clr = No)
DATA SETTING
CODE : B
DESCRIPTION : CONO2
1/22
Press ( diamond-shaped ) and the cursor will
flash in the CODE field. You may now enter a
number of letters for the format you are creating
by using the alphanumeric keypad on the panel.
( For each key 3 letters and one number are
possible. If you press the alphanumeric key more
than once, first the letters and then the number
will be cyclically activated ). Shift to the
DESCRIPTION field to enter the description of
the format in the same manner. The following
example may be useful:
EXAMPLE - If you wish to enter code B and a
CONO2 description, proceed as follows:
1 - Press
0
A
B
C
twice to display the letter B.
2 - Press to shift to the DESCRIPTION field
3 - Press
0
A
B
C
three times to display the letter C.
4 - Press . The cursor will shift to the right of
the letter C.
5 - Press
4
M
N
O
three times to display the letter O.
6 - Press . The cursor will shift to the right of
the letter O.
7 - Press
4
M
N
O
twice to display the letter N.
8 - Press . The cursor will shift to the right of
the letter N.
9 - Press
4
M
N
O
three times to display the letter O.
10 - Press . The cursor will shift to the right
of the letter O.
11 - Press
2
G
H
I
four times to display the number
2.
You have now entered code B and the description
CONO2, the data setting paged will therefore
appear as follows:
Press
Enter
to confirm the code and the format
description. Press
F7
to save the new format,
whose code and description are as described
above, in the panel.
The following question will be displayed:
move on to page 2/22 by pressing
pdown
.
The following page is displayed:
Confirm the operation by pressing
Enter
.
A new format has thus been created. It is now
possible to set the data of the working stations of
the machine as described below.
Starting from page 1/22 which indicates the
format in use.