Tetra Pak HOYER COMET N, Manual

Page: 69 / 151

6-15
Tetra Pak
Hoyer
CN 03 F A 01
Fig. E.1
1
5
3
4
2
6.1.7 Bulk ejection station
This device, assembled underneath the
lamellas and controlled by a mechanical cam,
supports the thrusting devices which eject the
cups.
The upward movement allows the ejectors
(Part. 1, Fig. E.1) to lift the cups from the
lamellas to be unloaded unto the unloading
belt by a pneumatic cylinder (Part. 2, Fig. E.1)
controlling the transfer tools (Part. 3, Fig. E.1)
and sent for unloading.
WARNING: The construction of the
cup feeding station does not permit protection
of moving parts at the sides in the tray and
unloading areas.
A moving parts sign is positioned on the fixed
guard.
Adjustment
The action of the mechanism may be adjusted
through cams using the operating panel.
Refer to point 5.2.1, Setting working
parameters.
Adjust the position of the transfer tools and
product conveyor belt so that cups do not
interfere with these parts during ejection,
moving the belt by slackening the anchoring
screws if necessary.
Check that the transfer tools push the cup onto
the product conveyor belt.
Replacement for format changes
If format changes involve a different cup
diameter, it will be necessary to change the
transfer tools“(Part. 3, Fig. E.1) that push the
product onto the belt, and the diameter or
shape of the ejector plates (Part. 1, Fig. E.1)
and adjust belt position along the longitudinal
axis to convey the cup in the best possible way.
Consult the spare parts catalogue for correct
identification of parts.