Tetra Pak HOYER COMET N, Manual

Page: 62 / 151

6-8
Tetra Pak
Hoyer
CN 03 F A 01
2
1
2
Fig. B.7
6.1.7 Ice cream fillers (2 flavours)
The containers are filled with ice cream by means
of fillers (Pos.1, Fig. B.7) which are activated by
pneumatic actuators.
The fillers are mounted on a mobile frame.
The upward and downward movements of the
mobile frame are achieved through an articulated
quadrilateral controlled by a cam (See Dispenser
Handling Station).
Usually, when in the filling position, the end part
of the dosage nozzles should be inside the
container placed under the lid’s positioning level
in order not to damage the ice cream decoration
after pressing the lid.
The required quantity of ice cream can be obtained
by modifying the speed of the freezer
appropriately, and by adjusting the beginning
and the duration of the filling phase on the
operator interface panel.
To enable the station in manual mode, press the
button (Page 1).
WARNING
The lateral protection of the kinematic
mechanisms in connection with the trays is not
allowed with this kind of ice cream filling stations.
A crushing hazard signal is placed on the fixed
protection.
Adjustments
Through the control panel which is interfaced
with the PLC unit, the beginning and the duration
of the mobile frame’s motion can be adjusted
with the dispensing time which has to take place
when the lamellas stop. Refer to 5.2.2 Setting
the work parameters.
Moreover, the quantity of ice cream to be
dispensed from each individual dispenser can be
balanced among the lines by adjusting the flow
regulators (Pos.2, Fig. B.7).