Tetra Pak HOYER COMET N, Manual

Page: 26 / 151

5-6
Tetra Pak
Hoyer
CN 03 E A 01
GROUPS POSITION
DOSER (1): 3
DOSER (2): 5
PENCIL FILLER: 8
TOPPING: 9
DRY NUT: 10
2/15
GROUPS POSITION
COCO/BALL DISPENSER: 11
FOIL DISPENSER:
11
SEALING: 12
LID DISPENSER 1: 14
LID DISPENSER 2: 15
3/15
GROUPS POSITION
CRIMPER: 18
DATER: 20
PICK&PLACE
PRODUCT EJECTION:
21
4/15
GROUPS POSITION
LAST STATION: 22
POSITION CAM: 230°
5/15
PARAMETERS
MAX SPEED: 50
ACTUAL SPEED:
MOTOR SAFETY:
6/15
DOSER (FLAME) SETUP
POSIT. 0: 0.0 mm SPEED: 0.0 mt/1
POSIT. 1: 0.0 mm SPEED: 0.0 mt/1
POSIT. 2: 0.0 mm SPEED: 0.0 mt/1
TX PARAMETERS (1= ON)
7/15
Press
pdup
or
pdown
to shift from one page to the
other.
Page 2/15 is accessed by pressing
pdown
, and
displays the following stations:
Factory-set values, may change according to the
station used.
To edit or enter new values, press . Enter
the required value using the numerical keypad,
and confirm by pressing
Enter
.
Press or to move to the following
or previous line and enter other positions.
Press
pdown
to access page 3/15.
Press
pdown
to access page 4/15.
Press
pdown
to access page 5/15.
The LAST STATION parameter identifies the
positions of the last station on the machine.
Because the machine is comprised of 15 steps,
when it is used for cones or cups, its value
normally is 15.
When the machine is equipped with a horizontal
extraction device ( optional ) the relative number
of the last station is 25.
Press
pdown
to access page 6/15.
Preset value: 18 rpm.
Max value allowed: 50 rpm.
To edit follow the same procedure explained for
station positions.
ACTUAL SPEED::real speed of the motor.
MOTOR SAFETY:Delay before the tripping of
the thermal switch; this prevents an occurrence
of an alarm for the starting torque.
Press
pdown
to access page 7/15.