manualshive.com logo in svg

Tetra Pak HOYER COMET N, Manual

Share
Download
Tetra Pak HOYER COMET N Manual Download Page 67

6-13

Tetra Pak

Hoyer

CN  03  F  A  01

Fig. D.3

6

2

3

5

1

4

6.1.12 Cover welding station

This device is constituted by welding heads (Part
1, Fig.D.3) fitted on the mobile upright (Part 2,
Fig.D.3) , which is driven by a system of levers
(Part 3, Fig.D.3) and controlled by pneumatic
actuators  (Part 4, Fig.D.3).
The lowering movement caused by the pneumatic
actuators (Part 4, Fig.D.3) places the welding
heads (Part 1, Fig.D.3) in contact with the cups
and covers that have to be welded.

To enable the station in manual cycle, press the
button               (Page 2).

Adjustments
The operating mode and temperature of welding
heads can be set on the operator’s panel, as
explained in Chapter 5. Setting working
parameters.
The backplates (Part 5, Fig.D.3) placed under
the shutter are used to create a reaction to the
pressing tool that is necessary to firmly seat the
cover.
The component fitted on the backplate (Part 6,
Fig..D.3) can be replaced when worn.

F17

Summary of Contents for HOYER COMET N
























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands