Terex Genie Z-40, Service And Repair Manual, Page: 127 / 287

June 2022 Service and Repair Manual
Deutz D 2.9 L4 Engine Fault Codes
Part No. 1268555GT Z ® -62/40 113
SPN = Suspect Parameter Number
FMI = Failure Mode Identifier
KWP = Keyword Protocol
SPN FMI KWP Description
175 2 738 Sensor oil temperature;
plausibility error
175 2 739
Sensor oil temperature;
plausibility error oil temperature
too high
175 3 743
Sensor error oil temperature;
signal range check high
175 4 744 Sensor error oil temperature;
signal range check low
190 0 389 Engine speed above warning
threshold (FOC-Level 1)
190 2 421 Offset angle between crank- and
camshaft sensor is too large
190 8 419 Sensor camshaft speed;
disturbed signal
190 8 422 Sensor crankshaft speed;
disturbed signal
190 11 390
Engine speed above warning
threshold (FOC-Level 2)
190 12 420 Sensor camshaft speed; no
signal
190 12 423 Sensor crankshaft speed; no
signal
190 14 391 Engine speed above warning
threshold (Overrun Mode)
190 14 1222 Camshaft- and Crankshaft speed
sensor signal not available on
CAN
411 0 791 Physical range check high for
differential pressure Venturiunit
(EGR)
411 1 792 Physical range check low for
differential pressure Venturiunit
(EGR)
411 3 795 Sensor error differential pressure
Venturiunit (EGR); signal range
check high
411 4 381 Physical range check low for
EGR differential pressure
411 4 796 Sensor error differential pressure
Venturiunit (EGR); signal range
check low
SPN FMI KWP Description
412 3 1007 Sensor error EGR cooler
downstream temperature; signal
range check high
412 4 1008
Sensor error EGR cooler
downstream temperature; signal
range check low
520 9 306
Timeout Error of CAN-Receive-
Frame TSC1TR; Setpoint
597 2 49 Break lever mainswitch and
break lever redundancy switch
status not plausible
624 3 971 SVS lamp; short circuit to batt.
624 4 972 SVS lamp; short circuit to grd.
624 5 969 SVS lamp; open load
624 12 970 SVS lamp; powerstage over
temperature
630 12 376 Access error EEPROM memory
(delete)
630 12 377 Access error EEPROM memory
(read)
630 12 378 Access error EEPROM memory
(write)
639 14 84 CAN-Bus 0 "BusOff-Status"
651 3 580 Injector 1 (in firing order); short
circuit
651 4 586 High side to low side short circuit
in the injector 1 (in firing order)
651 5 568
Injector 1 (in firing order);
interruption of electric connection
652 3 581 Injector 2 (in firing order); short
circuit
652 4 587 High side to low side short circuit
in the injector 2 (in firing order)
652 5 569 Injector 2 (in firing order);
interruption of electric connection
653 3 582 Injector 3 (in firing order); short
circuit
653 4 588 High side to low side short circuit
in the injector 3 (in firing order)
653 5 570
Injector 3 (in firing order);
interruption of electric connection