![background image](http://html.mh-extra.com/html/tem/ex10200006/ex10200006_user-manual_1085228005.webp)
4
press PLU and then press “1” “2” “4” on the numeric keypad.)
P1, P2... Keys
: Used for reaching at price lookup table by a single key.
Key
: Used for reaching at price lookup table that are written at the bottom of the price
lookup keys. (Ex: To reach P27, press and then P27)
FIRST OPERATION
When scale is turned on, all segments and symbols are displayed for a short period. Then, factory
defaults of major settings are displayed for about 10 seconds. After that, maximum capacity and division
is displayed for a while and scale gets ready for weighing.
Zero value is displayed. Zero and Equilibrium indicators are ON. Nothing should be placed on weighing
plate until it gets ready for weighing operation.
If there is any weight on weighing plate or there is no weighing plate on scale, ER 5 error message might
be seen on display. Be sure that there is no weight on the weighing plate before calling service.
WEIGHING THE PRODUCT
Place the product on the weighing plate. Wait until the Equilibrium indicator is on. Then weight of the
product will be displayed.
The value “0.000” should appear on the display and also the Equilibrium and Zero indicators should be
on when the weighing plate is empty. If the value on the display is not zero (or Equilibrium indicator is
not on), press zero key for resetting the display. After the zero is displayed and scale is balanced, proceed
to the weighing process.
WARNING: Never place any load exceeding the maximum capacity of scale. (“Max” capacity is given on
the data plate). Product should be placed on weighing plate gently by hand. Leaving the product from a
certain level of height or throwing it on to the weighing plate (even the weight is low) may damage the
scale.
WEIGHING BY PRICING
If unit price is entered while weighing, price to pay is calculated automatically. It is possible to enter unit
price in 2 different ways.:
Using the numeric keys from 0 to 9
Using the P1,…,P30 price lookup keys for pre-defined prices. Press (shift) key to reach the
programs located at the bottom (for programs between P16-P30).
Entered unit price and the total price will be calculated and displayed immediately while entering the
values.
NOTE
: Unit price can be entered as integer or fractional number.
Example : For a unit price 75.90;
1) Press “7” key.
2) Press
“5” key.
3) Press
“.” key.
4) Press ”9” key.
Summary of Contents for EX10200006
