21
3. Total Memory, Unit Price:
3.1 Adding without showing total memory (On)
If it is ON: Total will not be displayed after M+. Weighing value will be displayed.
If it is OFF: After M+, total will be displayed until the weighing plate is empty.
3.2 Temporary unit price (On)
Not available on these models.
3.3 Adding by M+ depending on the stability (On)
If it is approved, its default value is ON and it cannot be changed.
4. Limiting:
4.1 Lower Limit Set
Buzzer will be activated and start beeping when set lower limit reached.
4.2 Upper Limit Set
Buzzer will be deactivated and stop beeping when set upper limit reached.
4.3 Limitation On/Off
(On)
If this mode is ON, limiting function is active.
4.4 Lower limit to send the data to a PC after the stability (1)
4.5 Upper limit to send the data to a PC after the stability (1)
4.6 Tolerance interval to send the data to a PC after the stability (20)
4.7 Minimum stability period to send the data to a PC after the stability (10)
10
1 second
4.8 Sending data to a PC according to the stability On/Off (On)
5. LCD / Time Settings:
5.1 LCD contrast level (57)
Can be adjusted between 0 & 99.
First Decimal
: Contrast when backlight is not activated.
Second Decimal
: Contrast when backlight is activated.
5.2 Backlight brightness level (7)
Can be adjusted between 1 & 9
5.3 Date (Optional)
First two digits
: day
Middle two digits
: month
Last two digits
: year
Summary of Contents for EX10200006
