![background image](http://html.mh-extra.com/html/tem/ex10200006/ex10200006_user-manual_1085228035.webp)
34
FIRST OPERATION
When scale is turned on, all segments and symbols are displayed for a short period. Then, factory
defaults of major settings are displayed for about 10 seconds. After that, maximum capacity and division
is displayed for a while and scale gets ready for weighing.
Zero value is displayed. Zero and Equilibrium indicators are ON. Nothing should be placed on weighing
plate until it gets ready for weighing operation.
If there is any weight on weighing plate or there is no weighing plate on scale, ER 5 error message might
be seen on display. Be sure that there is no weight on the weighing plate before calling service.
WEIGHING THE PRODUCT
Place the product on the weighing plate. Wait until the Equilibrium indicator is on. Then weight of the
product will be displayed.
The value “0.000” should appear on the display and also the Equilibrium and Zero indicators should be
on when the weighing plate is empty. If the value on the display is not zero (or Equilibrium indicator is
not on), press zero key for resetting the display. After the zero is displayed and scale is balanced, proceed
to the weighing process.
WARNING: Never place any load exceeding the maximum capacity of scale. (“Max” capacity is given on
the data plate). Product should be placed on weighing plate gently by hand. Leaving the product from a
certain level of height or throwing it on to the weighing plate (even the weight is low) may damage the
scale.
COUNTING
To count the products, it is necessary that all products are the same type and have the same weight.
The weight of the single product called “unit weight”. If the unit weight of the product is known, then
the quantity of the products can be determined by sampling operation explained below.
COUNTING THE PRODUCTS WITH KNOWN UNIT WEIGHT
Enter unit weight by using “0”, “1” … “9” keys (numeric keys)
Entered unit weight will be displayed on the unit weight display
Calculating piece value will flash in the number display
Wait for five seconds and then enter the unit weight
Entered unit weight will be displayed on the unit weight display
Calculated piece quantity will be displayed on the number display
SAMPLING OPERATION
Put few pieces of the product on the plate by counting them manually (Note that the more
the number of pieces used for sampling the better is the result)
Enter the quantity of the product placed on the plate by using “0”, “1” … “9” keys
(numeric keys)
Summary of Contents for EX10200006
