13
10.4 Transmitting Data Selection (11111)
Determines which data to be transmitted to a PC.
1: Data will be transmitted.
0: Data will not be transmitted.
X X X X X
Price detail (Sum and Unit Price)
Date & Time
Tare
Mirror enable
Unit detail
NOTE: If the scale is approved model; price detail, unit detail and tare are always transmitted.
For models with printers, see related documents.
10.5 Baud Rate (0)
It determines the baud rate of RS232 communication between the scale and PC.
0 : 9600
1: 19200
2: 38400
3: 57600
4: 115200
10.6 Sending Only Weight Data (0ff)
If it is ON, only weight data will be transmitted.
11. Testing Menu:
Not available for these models.
12. Others:
12.1 Approved Scale Mode (On)
It can be changed only if the calibration key is ON. If it is turned ON, all settings will be
returned to factory default settings related to approval.
12.2 Startup Delay (10sec) (On)
If the scale is approved model, it cannot be changed.
12.3 Calibration Switch (Off)
If calibration switch is off, settings related to calibration switch cannot be changed. Password
is required to turn on the calibration switch. If calibration switch is turned on, initial scale
counter will be increased by one. At this stage, the seal of the scale will be broken. Only
legally authorized services are allowed to use this mode. Please check your countries legal
procedures.
Summary of Contents for EX10200006
