TEM EX10200006, User Manual

Page: 28 / 164

27
FIRST OPERATION
When scale is turned on, all segments and symbols are displayed for a short period. Then, factory
defaults of major settings are displayed for about 10 seconds. After that, maximum capacity and division
is displayed for a while and scale gets ready for weighing.
Zero value is displayed. Zero and Equilibrium indicators are ON. Nothing should be placed on weighing
plate until it gets ready for weighing operation.
If there is any weight on weighing plate or there is no weighing plate on scale, nnnnnn error message
might be seen on display. Be sure that there is no weight on the weighing plate before calling service.
WEIGHING THE PRODUCT
Place the product on the weighing plate. Wait until the Equilibrium indicator is on. Then weight of the
product will be displayed.
The value “0.000” should appear on the display and also the Equilibrium and Zero indicators should be
on when the weighing plate is empty. If the value on the display is not zero (or Equilibrium indicator is
not on), press zero key for resetting the display. After the zero is displayed and scale is balanced, proceed
to the weighing process.
WARNING: Never place any load exceeding the maximum capacity of scale. (“Max” capacity is given on
the data plate). Product should be placed on weighing plate gently by hand. Leaving the product from a
certain level of height or throwing it on to the weighing plate (even the weight is low) may damage the
scale.
WEIGHING WITH TARE

Place the tare weight on the weighing plate. Wait until the Equilibrium indicator is on. Tare
weight will be displayed.

Press Tare key. “dara” will be displayed for a second then “0.000” will be displayed. NET
indicator is ON. Tare symbol is flashing (only for LCD display). Tare has been weighed.

Place the product on weighing plate. Wait until Equilibrium indicator is on. Product’s net
weight will be displayed.

Empty the weighing plate. Wait until the Equilibrium indicator is on. NET and Tare indicators
are off. Tare is cancelled automatically.
NOTE
: Press Tare key twice for blocking the cancellation of tare. In this case, word “sabit” will be
displayed for a while and tare symbol (only for scales with LCD display) will be ON permanently. To
cancel tare, press Tare key when the weighing plate is empty.
Models with Tare symbol (for models with LCD displays);

Never ON : There is no tare.

FLASHING : When weighing plate is empty, tare will be cancelled automatically.

Always ON: Tare is fixed. Press Tare key to cancel it when weighing plate is empty.