![background image](http://html.mh-extra.com/html/tem/ex10200006/ex10200006_user-manual_1085228032.webp)
31
8.8 Load Cell mV/V value
mv/V value of the Load Cell used.
9. Relay Settings:
Not valid for this model.
10. Interface Settings:
(Valid only for PRINTER/PC type scales)
10.1 Communication ON/OFF (On)
If it is ON : RS232 communication is active.
If it is OFF : RS232 communication is inactive.
(It must be activated only for printer/pc type scales; otherwise ER 8 will occur.)
10.3 Continuous Transmitting (Off)
If it is ON : Activates continuous data transferring from scale to a PC.
If it is OFF : Communication is not continuous, data is sent when a request received from a
PC.
12. Others:
12.1 Approved Scale Mode (On)
It can be changed only if the calibration key is ON. If it is turned ON, all settings will be
returned to factory default settings related to approval.
12.2 Startup Delay (10sec) (On)
If the scale is approved model, it cannot be changed.
12.3 Calibration Switch (Off)
If calibration switch is off, settings related to calibration switch cannot be changed. Password
is required to turn on the calibration switch. If calibration switch is turned on, initial scale
counter will be increased by one. At this stage, the seal of the scale will be broken. Only
legally authorized services are allowed to use this mode. Please check your countries legal
procedures.
Summary of Contents for EX10200006
