TEM EX10200006, User Manual

Page: 21 / 164

20
SETTINGS MENU
Values in parenthesis are default factory settings.
1. Tare
1.1 Tare depends on stable equilibrium (On)
If it is approved, its default value is ON and it cannot be changed.
1.2 Cancel tare operation in negative net value (On)
Smaller tare than valid tare. (In negative net value). If it is approved, its default value is ON
and it cannot be changed.
1.3 Taring via Interface (Off)
Not valid for models without interface.
1.5 Temporary tare cancel (Off)
If it is ON, when tare button is pressed fixed tare is taken.
2. Zero Setting:
2.1 Initial zero setting range control ±10% (On)
If it is approved, its default value is ON and it cannot be changed.
2.2 Zero setting key range control < 2% (On)
If it is approved, its default value is ON and it cannot be changed.
2.3 Zero setting depends on stability (On)
If it is approved, its default value is ON and it cannot be changed.
2.4 Automatic zero setting (On)
If the weight indication is negative for more than 5 seconds when the equilibrium indicator
is on, zero will be set automatically.
2.5 Automatic zero tracking (On)
If it is ON : Automatic zero tracking is active when the display is zero and stable.
If it is OFF : Automatic zero tracking is not active.
NOTE
: If there is tare, automatic zero tracking function will not work.
2.6 Zero setting via interface (Off)
Not valid for models without interface.
2.7 Silo Mode Active/Passive (Off)
If it is ON : Silo Mode is active. Zero setting control is not done at the beginning.
If it is OFF : Silo Mode is not active.