Appendix B: Containers, Codecs, and Vantage Actions
TIFO Output
282
Lightspeed Live Capture User Guide
Command Line (option)
Configure the compressor using x265 command line syntax. For setting specific x265
parameters, you can enter x265 CLI commands (separated by spaces) to execute them.
For best results, be sure to use long form: --bframe 5, for example. Use of short form (-b
5) is not recommended.
The following x265 command line parameters are not supported:
--fake-interlaced
--nal-hrd cbr
--profile
--video-format
--bitrate
HEVC (H/W)
Profile
- Main
- Main 10
- Main 10 4:2:2
Bit Rate (in kbps)
- Between 512 and 50,000
Time Code Burn-in Filter
Select to have the media timecode burned into the output video.
- X Position: Burn timecode in at 0-4096 pixels from upper left corner.
- Y Postion: Burn in timecode at 0-2160 pixels from upper left corner.
- Font Size: Burned in timecode font size, 6-120 points.
- Text Color: Color of the text characters. Enter a color name (white, red, green, etc.), an
#RGB code, or #0000DD.
- Background Color: Color of the area behind the text. Enter a color name (white, red,
green, etc.), an #RGB code, or #0000DD.
- Timecode Transparency: The opacity of the timecode characters from 0.00 to 1.00 (0 to
100%). Zero is fully transparent, and 1.00 (100%) is fully opaque.
Audio Stream Details
Select the Audio Stream component to display its details on the right.
