Installing and Maintaining the Server
Installing the Server
37
Lightspeed Live Capture User Guide
Rack Installation
The Lightspeed Live server is designed to fit into a standard 19-inch (483 mm)
equipment rack with support front and rear, using supplied rack rails and rear support
extensions.
Assembling the Rails
The inner rail extensions install on each side of the chassis as shown. Align the
extension’s holes with the hooks on the side rail and slide the extension forward to
engage the hooks until the quick release bracket snaps into place. For added stability,
you can secure the extension with a screw.
The outer rails assemble by sliding the front and rear sections together as shown.
Installing Outer Rails into a Rack
Next, install the outer rails into the rack as shown in the next figure. Align the square
pegs on the front of the rail with the square holes in the front of the rack (C).
Push the rail into the rack until the quick release bracket snaps into place, securing the
rail to the rack.
