SeaBat Sonar UI - User Manual
Service
85
Figure 5-9
IO Module QC page with a timeout on the heading data
The BITE LED on the Sonar UI Toolbar will also turn red. See Sonar UI
Toolbar on page 12.
The status of the message fields are indicated by symbols:
: All items ok
: No data in datablock. (Some device drivers expect a certain
data field while it is not outputted by the connected device. It is
still possible to use this driver as long the required data field is
available.)
: Invalid data; one or more items failed to unpack.
The status indication is with respect to the last received data block. This
means the field can still marked as ok while the status box indicates time
out. (As it was received previously correct.) See Figure 5-10.
Figure 5-10
Status indication
The raw data as received from the IO Module is displayed. These are the
data strings of all the data that is received on the different ports. When in
the IO Module pane for the ‘Input Distribution’ an destination address is
entered (see page 36) all the data as displayed in the Raw Data
Messages will be outputted.
