Teledyne UI User Manual Download

Page: 94 / 128



Service

SeaBat Sonar UI - User Manual

Figure 5-4

Example of error messages in the Status page

Status tab messages are color coded.



Red LED: error



Yellow LED: warning



Green LED: error/warning solved.
The solved error/warning message remains in the list until

removed by clicking

The error or warning message will also be displayed in the related BITE
information on the Details tab (see 5.3.2 below).

In addition to the error/warning itself, the message contains information to
assist the operator solve the problem:



The possible cause of the error/warning.



The effect of the problem on the system.



A hint for the operator to understand the problem.

Use

to save all information of all tabs to a HTML file.

The

name of the file will contain the timestamp so successive files won’t

overwrite each other.

Summary of Contents for UI

































































































































Search results

Summary of Contents for UI

Reviews:

Related manuals for UI

Brands by name

Popular brands

Teledyne UI, User Manual

Search results

Summary of Contents for UI

Reviews:

Related manuals for UI

Brands by name

Popular brands