64
Operation
SeaBat Sonar UI - User Manual
4.10.8 Dual Head Pipe Detection Considerations
It is possible to use a dual head system for pipe detection and tracking.
Refer to appendix A Dual head on page 87 how to configure a dual head
system in the Sonar UI.
It is essential the correct offsets and head tilt parameters are defined in
the hardware pane.
Define the estimated speed of the vessel on which the pipe
survey will be accomplished. This value improves the along track
distance estimation.
The master and slave individually controls the pipe steering
(horizontal or flex).
Disable real time pipe detection of the slave when the master is
used for the pipe detection. Set in this case the correct pipe
parameters in the master.
Note when ping pong mode is used the pings as indicated in the
wedge view, for the master and slave are shifted. In full rate
mode they lay on each other.
Figure 4-80 Pings
4.11 Screens
It is possible in the Operation mode to display four different screens:
The wedge
The Detect or Water column
Sidescan
Snippets
The screens are switched on/off in the Main pane (see page 23).
When a screen is disabled then no historical data will be logged. This
means when enabling a view during acquisition the associated view(s) will
start empty.
