Status pop-up menu (Audio Session display).
Press and hold the STATUS button
to open the Status pop-up menu. The following menu selections are available:
NOTE.
To reset, stop, or start an individual audio or video session, select the tile
in which it is displayed and use the SEL button, right arrow key, and left arrow
key, respectively. Remember that the STATUS pop-up menu must be closed.
Otherwise, the button and key presses will navigate through that menu.
■
Display Type
and
ARIB Display:
Use the arrow keys to select a status
display. See
■
Mute Alarms
: Mutes alarms for all Status display types.
■
All Sessions Reset
: Globally resets any and all audio sessions displayed in
all panes, regardless of the display and session from which it is executed.
■
All Sessions Start
: Globally starts any and all stopped audio sessions
displayed in all panes, regardless of the display and session from which it is
executed.
■
All Sessions Stop
: Globally stops any and all stopped audio sessions
displayed in all panes, regardless of the display and session from which it is
executed.
CONFIG menu.
Use the CONFIG menu to set the following audio parameters:
■
Use the menu selections under
Digital Audio Displays
to configure various
audio display parameters such as meter type, ballistic characteristics, peak
program level, meter scaling, alarm thresholds, correlation speed, and turning
the Lissajous AGC mode on and off.
■
Use the menu selections under
Audio Inputs/Outputs
to configure audio
input and output parameters such as selecting which channels are active on
each audio input port, selecting how each audio port is displayed, selecting
the audio output source, selecting which channels to de-embed from the SDI
video, configuring the “map” of active audio for each video input, and
adjusting the speaker and headphone volume.
If Option 3G is installed, 3G Level A signals use the Embedded A or B
settings as appropriate. 3G Level B signals use the Embedded Dual Link
settings.
■
Use the menu selections under
Alarms > Audio Content
and
Alarms >
AES/Embedded
to enable various audio alarms.
Display modes
WFM2300 and WFM2200A Waveform Monitors User Manual
117
Summary of Contents for WFM2200A
