■
AES CRC ERROR.
The CRC code in the AES channel status packet is
incorrect. Sometimes the CRC code is set to zero, indicating that the signal is
missing; when this is the case, this message is not displayed.
■
MUTE.
The number of consecutive all-zero samples equals or exceeds the #
Samples for Mute setting.
■
SILENCE.
The signal is at or below the specified Silence Level for a time
exceeding the Duration for Silence setting.
■
DISABLED.
Indicates that an audio bar is not active.
■
AES V BIT.
Indicates that the Validity bit is set high for one or more data
samples. In the AES/EBU standard, a set Validity bit indicates that the
sample is not suitable for conversion to audio.
When the Ignore Validity Bit setting is set to On in the CONFIG > Digital
Audio Displays submenu (the default value), the Validity bit is ignored and
the audio sample as treated as normal audio. When the Ignore Validity Bit
setting is set to Off, then the Validity bit value is used to mute the audio
when the bit value is high.
■
NO AUDIO.
Indicates that an AES or embedded input has the Non audio bit
set.
■
NOT PRESENT.
Indicates that an audio channel is not present in the current
audio input.
■
DOLBY D.
Indicates an AES or embedded input is DOLBY Digital (not
plus).
■
DOLBY D+.
Indicates an AES or embedded input is DOLBY Digital Plus.
■
DOLBY E.
Indicates an AES or embedded input is DOLBY E.
Audio pop-up menu
Press and hold the AUDIO button to open the Audio pop-up menu. The Audio
pop-up menu enables you to select the audio input source and specify whether
one of the auxiliary displays (audio phase or surround-sound) appears to the right
of the level meter display. Some of the menu selections depend on the selected
audio input source and which auxiliary display is enabled.
Display modes
WFM2300 and WFM2200A Waveform Monitors User Manual
61
Summary of Contents for WFM2200A
