Tektronix WFM2200A, User Manual

Page: 168 / 276

Signal pattern.
When the SDI Output setting is Test Signal, selects one of the
following signals to be output. For more information about these signals, see the
appropriate SMPTE standard.
■ 100% bar
■ 75% bar
■ Pathological
■ SMPTE EG1 Bars
■ EG432-1 Color Bar
■ RP219 Color Bar
■ 0% Flat Field
■ 50% Flat Field
■ 100% Flat Field
■ 5-Step Staircase
■ 10-Step Staircase
■ Checkerboard
■ Clean Aperture
■ Production Aperture
■ Convergence
■ Pluge and luma
■ SMPTE 303M Color Reference
■ ChromaDuMonde
■ Multiburst
■ Y Multiburst
Signal level.
When the SDI Output setting is Test Signal, selects the level of the
output signal (Level A or Level B).
Signal format. When the SDI Output setting is Test Signal, selects the format of
the output signal.
Genlock.
Enables or disables whether the generator signal output is genlocked to
the external reference input signal.
Genlock offset V.
Sets the amount of offset (in video lines of the configured
generator test signal video format) for the vertical timing of the output test signal
relative to the external reference signal.
Genlock offset H. Sets the amount of offset (in microseconds) for the horizontal
timing of the output test signal relative to the external reference signal.
Display modes
146 WFM2300 and WFM2200A Waveform Monitors User Manual