Tektronix WFM2200A, User Manual

Page: 150 / 276

■ Vendor Name : Name of SFP vendor.
■ Vendor PN : Vendor part number for SFP.
■ Wavelength : Shows received or transmitted wavelength in nanometers (nm).
■ Mfg Date Code : Vendor date of SFP manufacture.
Status pop-up menu (SFP Module Status display).
Press and hold the STATUS
button to open the Status pop-up menu. The following menu selections are
available:
■ Display Type and ARIB Display: Use the arrow keys to select a status
display. See To select a status display on page 108.
■ SFP Config: Sets the type of SFP module to None, Sole Transmitter, Sole
Receiver, Transceiver, Dual Transmitters, or Dual Receivers.
CONFIG menu.
Use the selections under Input Mode > SFP Module Config to
set the type of SFP module to None, Sole Transmitter, Sole Receiver,
Transceiver, Dual Transmitters, or Dual Receivers.
SDI Status display
(WFM2300 only)
With the WFM2300 waveform monitor, you can view two measurements of
signal jitter and cable loss in both dB and meters of the selected cable type, and
calculated source level. Automatic measurements of eye amplitude, rise time, fall
time, overshoot, and rise-fall difference are also displayed.
Figure 43: SDI Status display
Display modes
128 WFM2300 and WFM2200A Waveform Monitors User Manual