Tektronix WFM2200A, User Manual

Page: 67 / 276

■ SMPTE 303M Color Reference
■ ChromaDuMonde
■ Multiburst
■ Y Multiburst
For more information about these signals, see the appropriate SMPTE standard.
The following illustration shows signal connections for testing a device. After
you connect the signals, use
CONFIG > Video/Gen Outputs submenu or the
GEN pop-up menu to select the test signal pattern, level, and format you want to
generate.
Figure 8: Video signal generation connection
Genlock function. You can enable the SDI output signal to genlock to the external
reference signal by pressing the CONFIG button and selecting Video/Gen
Outputs > Test Signal Genlock > Enable . You can also use the CONFIG menu
to set the vertical and horizontal timing offsets used by the genlock function. The
genlock status icon in the Status Bar indicates the genlock status. See
Status bar
icons on page 40.
AES audio output
This instrument can generate the following AES audio signals:
■ Test signal: AES test tones with user-configurable frequency, amplitude, and
bitdepth.
■
AES out: loopthrough output of the signal on the MULTI IN connector.
■ Audio output: output of the embedded audio in the video signal being output
on the SDI OUT connector.
The following illustration shows signal connections for testing a device. After
you connect the signals, use
CONFIG > Audio/Gen Outputs submenu or the
GEN pop-up menu to select the AES audio signal type that you want to generate.
Getting acquainted with your instrument
WFM2300 and WFM2200A Waveform Monitors User Manual 45