Models 707B and 708B Switching Matrix Reference Manual
Section 7: TSP command reference
707B-901-01 Rev. B / January 2015
7-29
Details
The
channelList
parameter can contain more than one channel. If it does, a comma delimits the
labels for the channels. The return string lists the labels in the same order that the channels were
specified. The
channelList
parameter cannot be an empty string and must be a valid channel.
The
channelList
parameter can contain
slot
X
(where X equals 1 to 6 for Model 707B, or 1 for
Model 708B) or
allslots
. In this case, the channels are listed before the analog backplane relays.
•
An error is generated if:
•
The slot is empty
•
The specified channel is not on the installed card
•
A channel pattern is specified
Command processing stops as soon as an error is detected, and then a
nil
response is generated.
No partial list of labels is returned.
Example
channel.reset("1A01")
print(channel.getlabel("1A01"))
channel.setlabel("1A01", "Device")
print(channel.getlabel("1A01"))
Reset the channel.
Print the default label of the channel.
Set the label to "Device".
Return the new label.
Output:
1A01
Device
Also see
(on page 7-43)