Models 707B and 708B Switching Matrix Reference Manual
Section 2: General operation
707B-901-01 Rev. B / January 2015
2-77
Admin page
Through the Admin page, you can change the instrument password and the instrument time.
Change the password
To change the password for the web interface:
1. In the web interface, from the left navigation, click
Admin
. A login page is displayed.
2. Enter the current password in the Password box. (The default is "admin".)
3. Click
Login
. The Administration page is displayed.
4. In the Current Password box, enter the current password.
5. In the New Password box, enter the new password.
6. In the Confirm New Password box, enter the new password again.
7. Click
Submit
. The new password takes effect immediately.
Change the instrument date and time
To change the date and time of the instrument:
1. In the web interface, from the left navigation, click
Admin
. A login page is displayed.
2. Enter the current password in the Password box (the default is "admin").
3. Click
Login
. The Administration page is displayed.
4. Enter the Year.
5. Select the Month, Day, Hour, Minutes and Seconds from the lists.
6. Click
Submit
. The new time and date information takes effect immediately.
Unit page
Create Config Script
: Save the set up of the instrument as a script.
To create the script:
1. Click
Create Config Script
. The Create Config Script dialog box is displayed.
2. To create a script that will run automatically when the instrument is powered on, select "Auto-
execute on powerup." Note that this will overwrite the existing autoexec script.
3. To create a script with a new name, select Name and enter the name.
4. Click
OK
.
Reset
: Resets all instruments in the TSP-enabled system. This is only available if the instrument is
the master.
Open All
: Click this to open all relays on all slots.
Upgrade Firmware
: Select a firmware upgrade file to download to the instrument and begin the
upgrade process.
Channel Connect Rule
: Select the channel connect rule. See
(on page 2-82) for detail.
Digital I/O Lines
: This is the tool to configure the 14 digital I/O lines of the instrument. Values can be
read or written to the ports, or each individual bit can be toggled. "Write Protect" can be set
individually for any I/O line.