Models 707B and 708B Switching Matrix Reference Manual
Section 5: Introduction to TSP operation
707B-901-01 Rev. B / January 2015
5-11
Local node
Commands that allow you to set and read from the local node.
(on page 7-118)
(on page 7-119)
(on page 7-121)
(on page 7-121)
(on page 7-123)
(on page 7-124)
(on page 7-124)
(on page 7-125)
(on page 7-126)
(on page 7-127)
(on page 7-120)
(on page 7-120)
(on page 7-126)
make accessor functions
Use these functions to create functions to get and set attribute values.
memory functions
Check the amount of memory that is available or used in the instrument.
opc function
This function sets the operation complete status bit when all overlapped commands are completed.
print functions
Output data from the instrument.
(on page 7-131)
(on page 7-132)
(on page 7-134)
Reset
Resets settings to their default settings.
(on page 7-58)
(on page 7-101)
(on page 7-124)
(on page 7-135)
(on page 7-200)
(on page 7-203)
(on page 7-211)
(on page 7-224)