Acquiring Waveforms
3- 16
CSA7000 Series, TDS7000 Series, & TDS6000 Series Instruments User Manual
Overview
Related control elements and resources
To set up signal input (Cont.)
Set horizontal
acquisition
window
8.
Use horizontal knobs to scale and position the waveform
on screen and to set record length.
Positioned horizontally
Scaled horizontally
The Resolution knob sets the record length. (See
discussion on page 3--24.)
If required to stabilize the display, push LEVEL to set the
trigger level to 50%.
Dragging the reference icon
also positions the waveform.
For help
9.
For more information on the controls described in this
procedure, push the Vert or Horiz button. Touch the
HELP button in the toolbar.
Continue with
acquisition
setup
10.
To finish acquisition setup, you must set the
acquisition mode and start the acquisition.
See
To Set Acquisition Modes
on page 3--34.
Summary of Contents for CSA7154
