Field or control
Description
FD Bit Rate
Select the FD bit rate of your CAN FD serial bus data.
To enter a custom bit rate, select Custom and enter the custom bit rate in the Custom Rate input box.
This field is only available when CAN Standard = CAN FD.
Custom Rate
Sets the custom bit rate to use to decode the signal. Tap the field and use the Multipurpose knob to
change the value, or double-tap on the field and use the virtual keypad to enter a custom bit rate.
This field is only available when Bit Rate, SD Bit Rate, or FD Bit Rate = Custom.
Display Format
Bus sets the waveform view to show just the decoded bus information.
Bus and Waveform sets the waveform view to show both the decoded bus and the logical views of
each constituent signal.
You can also tap on the + symbol on the bus waveform to toggle between showing the bus only or
showing bus and source waveforms.
Decode Format
Sets the decode format used to display the bus information. Formats are Hex, Binary, and Mixed Hex.
Mixed Hex displays some fields as binary, and other fields as hexadecimal.
Other bus types
Serial bus types, such as CAN, LIN, Ethernet, and so on, are available as purchasable options. Once purchased and installed, the new bus
types are shown in the Bus Type menu. The serial bus options also add corresponding bus trigger capabilities to the Trigger menu.
Use the following links to access information on specific Bus configuration menus.
Parallel Bus configuration menu
I2C serial bus configuration menu
on page 123
SPI serial bus configuration menu
on page 131
on page 129
CAN serial bus configuration menu
on page 120
LIN serial bus configuration menu
on page 124
FlexRay serial bus configuration menu
on page 122
Audio serial bus configuration menu
USB serial bus configuration menu
on page 132
on page 126
on page 117
See also
Menus and dialog boxes
3 Series Mixed Domain Oscilloscope Printable Help
121
