manualshive.com logo in svg

Tektronix 3 Series, Printable Help

Introducing the Huawei 3 Series user manual, your essential guide to unlocking the full potential of your device. Download this comprehensive manual for free from manualshive.com, and get instant access to step-by-step instructions, troubleshooting tips, and expert advice to enhance your Huawei 3 Series experience.

Share
Download
background image

Option upgrades

The 3 Series MDO products offer a number of ways to add functionality after the initial purchase.

Post-purchase instrument options

Option upgrades add functionality to your 3 Series MDO after you receive it from the factory. The upgrades are enabled by installing a
software license key that is specific to the model and serial number of your oscilloscope. The license key from Tektronix is provided with
the purchase of your options.

Table 9: Instrument upgrade options

Option name

Description

SUP3 AFG

Adds the arbitrary function generator to any 3 Series MDO product

SUP3 DVM

Adds a digital voltmeter and frequency counter.

This option is free when you register your product. To register go to: 

www.tektronix.com/

register3mdo

SUP3 MSO

Adds 16 digital channels and includes a P6316 digital probe and accessories

SUP3 SA1

Free with registration. Adds a spectrum analyzer; frequency range from 9 kHz to 1 GHz
and capture bandwidth to 1 GHz

SUP3 SA3

Adds a spectrum analyzer; frequency range from 9 kHz to 3 GHz and capture bandwidth to
3 GHz

SUP3 BND

Adds an application bundle (includes all serial options and power analysis option)

SUP3 SRAERO

Adds aerospace serial triggering and analysis (MIL-STD-1553, ARINC429)

SUP3 SRAUDIO

Adds audio serial triggering and analysis (I

2

S, LJ, RJ, TDM)

SUP3 SRAUTO

Adds automotive serial triggering and analysis (CAN, CAN FD, LIN, FlexRay)

SUP3 SRCOMP

Adds computer serial triggering and analysis (RS-232/422/485/UART)

SUP3 SREMBD

Adds embedded serial triggering and analysis (I

2

C, SPI).

SUP3 SRUSB2

Adds USB serial triggering and analysis (USB 2.0 LS, FS, HS)

SUP3 PWR

Add power measurement and analysis

SUP3 T3

Three Year Total Protection Plaln, includes repair or replacement coverage from wear and
tear, accidental damage, ESD or EOS plus preventative maintenance, including a 5 day
turnaround time and priority access to customer support

SUP3 T5

Five Year Total Protection Plaln, includes repair or replacement coverage from wear and
tear, accidental damage, ESD or EOS plus preventative maintenance, including a 5 day
turnaround time and priority access to customer support

Bandwidth upgrade options

Instrument bandwidth can be upgraded on any 3 Series MDO product after initial purchase. Each upgrade product increases analog
bandwidth and spectrum analyzer frequency range. Bandwidth upgrades are purchased based on the combination of the current
bandwidth and the desired bandwidth. Software option key depends on the instrument model and serial number combination. Bandwidth
upgrades up to 500 MHz can be performed in the field, while upgrades to 1 GHz require installation at a Tektronix service center.

Option upgrades

3 Series Mixed Domain Oscilloscope Printable Help

29

Summary of Contents for 3 Series



























































































































































































































































































Reviews:

No comments

Related manuals for 3 Series

Fender 1 Brochure preview
1
Brand: Fender Pages: 15
J D Squared 4 Assembly & Operating Instructions preview
4
Brand: J D Squared Pages: 18
B&K CT1 User Manual preview
CT1
Brand: B&K Pages: 12
Panasonic LP-GS Series Serial Communication Command Manual preview
LP-GS Series
Brand: Panasonic Pages: 180
Gardol GLVE 1400-34 Original Operating Instructions preview
GLVE 1400-34
Brand: Gardol Pages: 260
York Fitness 60091 Owner'S Manual preview
60091
Brand: York Fitness Pages: 20
Velleman K4401 Illustrated Assembly Manual preview
K4401
Brand: Velleman Pages: 16
Velleman VTTEST11 Manual preview
VTTEST11
Brand: Velleman Pages: 11
Ultrasonic BT H Series Manual preview
BT H Series
Brand: Ultrasonic Pages: 33
Tarmo 602456 Manual preview
602456
Brand: Tarmo Pages: 4
Hammer Strength HDT-MAB Assembly Manual preview
HDT-MAB
Brand: Hammer Strength Pages: 8
M&R Sportsman EXG 14/12 Manual preview
Sportsman EXG 14/12
Brand: M&R Pages: 98
siat SM446 HS Instruction Manual And Spare Parts List preview
SM446 HS
Brand: siat Pages: 102
Turner Designs TD-700 Operating Manual preview
TD-700
Brand: Turner Designs Pages: 55
Meheen MERLIN N Series Operating Manual preview
MERLIN N Series
Brand: Meheen Pages: 24
Williams Sound IR E4 User Manual preview
IR E4
Brand: Williams Sound Pages: 32
OttLite 580083 Quick Start Manual preview
580083
Brand: OttLite Pages: 5
HADEF EHH Installation, Operating And Maintenance Instructions For The Installer And The User preview
EHH
Brand: HADEF Pages: 13

Brands by name

Popular brands

Load more brands