Tektronix 3 Series, Printable Help

Page: 128 / 282

Field or control Description
Clock Polarity
Sets the clock signal edge (rising, falling, or both) to use for timing reference.
This field is only available when Clocked Data is set to Yes.
Threshold Sets the threshold value to determine high logic value.
This field is only available when Clocked Data is set to Yes.
Define Inputs Opens a Parallel Bus - Define Inputs configuration menu to set the signal sources and the bit order
(MSB to LSB) for the bus. See
Parallel Bus - Define Inputs menu on page 129.
Display Format Sets the waveform view to show just the decoded bus information, or the decoded bus and the logical
views of each constituent signal.
Decode Format
Sets the decode format used to display the bus information. Formats are Hex and Binary.
Other bus types
Serial bus types, such as CAN, LIN, Ethernet, and so on, are available as purchasable options. Once purchased and installed, the new bus
types are shown in the Bus Type menu. The serial bus options also add corresponding bus trigger capabilities to the Trigger menu.
Use the following links to access information on specific Bus configuration menus.
Parallel Bus configuration menu on page 127
I2C serial bus configuration menu on page 123
SPI serial bus configuration menu on page 131
RS-232 serial bus menu on page 129
CAN serial bus configuration menu on page 120
LIN serial bus configuration menu on page 124
FlexRay serial bus configuration menu on page 122
Audio serial bus configuration menu on page 118
USB serial bus configuration menu on page 132
MIL-STD-1553 serial bus menu on page 126
ARINC429 serial bus menu on page 117
See also
Bus Trigger configuration on page 199
Bus Search configuration menus on page 135
Menus and dialog boxes
3 Series Mixed Domain Oscilloscope Printable Help 128