manualshive.com logo in svg

Tektronix 3 Series, Printable Help

Introducing the Huawei 3 Series user manual, your essential guide to unlocking the full potential of your device. Download this comprehensive manual for free from manualshive.com, and get instant access to step-by-step instructions, troubleshooting tips, and expert advice to enhance your Huawei 3 Series experience.

Share
Download
background image

 

Field or control

Description

Source

Select the CAN bus on which you want to trigger.

Trigger On

Select the type of information on which to trigger.

Frame Type

Sets the frame type on which to trigger.

Available when Trigger On = Type of Frame.

FD BRS Bit

Sets the FD BRS or EIS bit to X, 0, or 1.

Available when Source is a CAN FD bus and Trigger On = FD BRS Bit.

FD ESI Bit

Sets the FD BRS or EIS bit to X, 0, or 1.

Available when Source is a CAN FD bus and Trigger On = FD ESI Bits.

Trigger When Data

Select the Trigger When Data condition from the drop down list.

Available when Trigger On = Data or Identifier & Data.

Identifier Format

Sets the identifier for standard (11-bit) or extended (29-bit for CAN 2.0B) length.

Available when Trigger On = Identifier or Identifier & Data.

Data Bytes

Sets the number of data bytes on which to trigger (one to eight bytes). Use the A knob to change the
value.

Available when Trigger On = Data or Identifier & Data.

Data Offset

Sets the data offset in bytes to delay the trigger.

Available when Trigger On = Data or Identifier & Data.

Identifier

Sets the identifier pattern on which to trigger. The number of bits shown depends on the Identifier
Format setting.

Tap the Binary or Hex field and use the A and B knobs to select and change the values. Or double-tap
on the field and use the virtual keypad to enter values.

Available when Trigger On = Identifier or Identifier & Data.

Data

Sets the data pattern on which to trigger. The number of bits shown depends on the Data Bytes
setting.

Tap the Binary or Hex field and use the A and B knobs to select and change the values. Or double-tap
on the field and use the virtual keypad to enter values. See 

Binary, decimal, hex, and octal virtual

keypads

 on page 228.

Available when Trigger On = Data or Identifier & Data.

A, B knob controls

Use the A knob to select (highlight) the digit(s) to change.

 

Use the B knob to change the value of the digit(s).

Table continued…

Menus and dialog boxes

3 Series Mixed Domain Oscilloscope Printable Help

203

Summary of Contents for 3 Series



























































































































































































































































































Reviews:

No comments

Related manuals for 3 Series

ParaBody 810 Assembly Instruction Sheet preview
810
Brand: ParaBody Pages: 4
ICS ELECTRONICS 4803 Quick Start Manual preview
4803
Brand: ICS ELECTRONICS Pages: 6
idiag P100 Quick Reference Manual preview
P100
Brand: idiag Pages: 12
Parker Research Corp B100 Operating Instructions preview
B100
Brand: Parker Research Corp Pages: 4
Eastwood B100 Instructions Manual preview
B100
Brand: Eastwood Pages: 20
Daihan Scientific WiseSpin CF-10 Operation Manual preview
WiseSpin CF-10
Brand: Daihan Scientific Pages: 43
Malekko QUAD ENVELOPE Quick Start Manual preview
QUAD ENVELOPE
Brand: Malekko Pages: 2
Major MJ2000 Operator'S Manual preview
MJ2000
Brand: Major Pages: 26
NanoVibronix UROSHIELD Quick Manual preview
UROSHIELD
Brand: NanoVibronix Pages: 2
NanoVibronix PainShield User Manual preview
PainShield
Brand: NanoVibronix Pages: 32
Nanoleaf Shapes Hexagons User Manual preview
Shapes Hexagons
Brand: Nanoleaf Pages: 27
P-Q Controls 504 Series Operation Manual preview
504 Series
Brand: P-Q Controls Pages: 5
P+L Systems Flypod Quick Start Manual preview
Flypod
Brand: P+L Systems Pages: 2
UNI-T UT673A Quick Start Manual preview
UT673A
Brand: UNI-T Pages: 4
UNI-T UPO3000E Series Programming Manual preview
UPO3000E Series
Brand: UNI-T Pages: 94
Underhill Tracker T-400 Assembly Instructions And Operation Manual preview
Tracker T-400
Brand: Underhill Pages: 12
UMS HYPROP User Manual preview
HYPROP
Brand: UMS Pages: 92
Eaton Cutler-Hammer ATC-300 Instruction Booklet preview
Cutler-Hammer ATC-300
Brand: Eaton Pages: 32

Brands by name

Popular brands

Load more brands