Chapter 4 Waveform Creation System
Waveform Creation using Front Panel-Vertex Mode
Vertex Mode (continued)
Summing Standard Functions
Any one of the 20 standard functions can be algebraically summed to any part
or all of any other standard function.
1) Select the first standard waveshape as in previous section.
2) If the second standard waveshape is to be summed to only a portion of
the first standard waveshape, reposition the anchors as described in
previous section.
3) Press either the left or right arrow key.
4) Press
SUMF
softkey (Fl).
5) Select desired standard waveshape by pressing softkey. Use left and right arrow keys to
view all 20 waveshapes. Access any desired ancillary functions by pressing the --> softkey
(Fl). (Reduce the digital amplitude value as necessary to prevent clipping.)
6) Press
SHOW
softkey (F2) to preview summed waveforms.
7) Press
CANC
softkey (F4) to cancel.
8) Press
OK
softkey (F3) to store summed waveforms.
Dump Function
Dump Function permits a standard waveform to be conveniently loaded into the entire length of
a Waveform Number without specifying left and right anchors. Thus, standard waveforms can
be inserted in Waveform Numbers with lengths greater than 8000 points.
1) Select the desired Waveform Number.
2) Press either the left or right arrow key.
3) Press
DMPF
softkey (F2).
4) Select desired standard waveshape by pressing softkey. Use left and right arrow keys to
view all 20 waveshapes. Access any desired ancillary functions by pressing the --> soft
key (Fl).
5) Press
DO
softkey (F2) to store the waveform in memory and permit further changes or
press
OK
softkey (F3) to store waveform and return to previous menu.
CAUTION
It is not possible to preview a function when
using Dump Function. Both the DO and OK
commands above will cause the new wave-
form to write over any previous waveforms.
4-12
Summary of Contents for 2411B
