Tegam 2411B, Operation Manual

Page: 39 / 140

Chapter 3 Front-Panel Menu Operation
Default Settings (continued)
Standard Waveform Default Settings (continued)
Default settings are listed in the following tables. The limits are shown in parenthesis.
3-8
Function Parameters Range Defaults
Sine (SIN)
Phase 0.000~360.000° 0.000°
Number of Cycles 0.01~1000.00 1.00
Square (SQU)
Number of Cycles 1 ~ 1000 1
Duty Cycle 1~100% 50%
Triangle (TRI) Number of Cycles 1 ~ 1000 1
Number of Cycles 1~1000 1
Sawtooth
(SAW+/-)
Duty Cycle 1~100% 100%
DC DC - 32768~
+32767
0
Exponential
(EXP+/-)
Time Constant 0.01~20.00 5
Amplitude
Modulation
(AM)
Carrier Frequency 1~10000 20
Modulation 1~10000 1
Modulation Index 0~200% 100%
Modulation Phase 0~360° 0°
Carrier Phase 0~360° 0°
Suppressed
Carrier
Modulation
(SCM)
Carrier Frequency 1~1000 20
Modulation Freq. 1~1000 1
Modulation Phase 0~360° 0°
Carrier Phase 0~360° 0°
Haversine
(HSIN)
Number of Cycles
0.01 ~ 1000.00
1.00
Linear Sweep
(SLIN)
Begin 1 ~ 1000 1
End 1 ~ 1000 10
Log Sweep
(SLOG)
Begin 1 ~ 1000 1
End 1 ~ 1000 10
Pulse
(PLS+/-)
Delay 0~100% 0%
Rise Time 0~100% 10%
High Time 0~100% 30%
Fall Time 0~100% 10%
Number of Cycles 1~1000 1
Gaussian
(GAUS)
Exponent 0.01 ~ 20.00 2
Sine X/X (SX/X) Number 4.00 ~ 1000.00 5.50
Circle (CIRC)
Number of Cycles 0.01 ~ 1000.00 1.00
Phase 0.01 ~ 360.00° 0.00°