Tegam 2411B, Operation Manual, Page: 118 / 140

Chapter 8 Advanced Remote Operation
Arbitrary Sync Pattern Programming - Overview
Arbitrary Sync Pattern Programming
Overview
Arbitrary pattern programming and query for SYNC1 ... SYNC4 is implemented by a group of remote
commands.
Sync Data for spcified channel, Start/Length pairs (WVFM:SYNCX)
{<sync_nr>, <sync_start>, <sync_len> [,<sync_start>, <sync_len>]...}
Sync Data only (WVFM:MEMS)
{<start_addr>, <decimal_data_val | arb_data_block> [,<decimal_data_val |
arb_data_block>]...}
Sync + Waveform Data (WVFM:MEMX)
{<start_addr>, <<<sync_val>,<wvfm_val>> | arb_data_block >
[,<<<sync_val>,<wvfm_val»| arb_data_block >]...}
Query Single Sync Data Value (WVFM:MEMS?)
{<start_addr>
Query Single Sync + Waveform Data Value (WVFM:MEMX?)
{<start_addr>}
Query Block of Sync Data (WVFM:MBLKS?)
{<start_addr>, <m_of_points>}
Query block of Sync + Waveform data (WVFM:MBLKX?)
{<start_addr>, <nr_of_points>}
Start/Length Sync Programming
Install a series of sync pulses into the specified sync channel.
WVFM:SYNCX
{<sync_nr>, <sync_start>, <sync_len> [,<sync_start>, <sync_len>]...}
<sync_nr> Sync channel, is between 1 to 4.
<sync_start> Specifies where in the selected waveform the pulse begins,
can be from 0 to size of waveform - 1.
<sync_len> Specifies the total length of the pulse. Ranges from 0 to size of
waveform - <sync_start>.
8-28