Chapter 4 Waveform Creation System
Waveform Creation using Front Panel-Examples
Examples (continued)
13) Set
DO
(Digital Offset) = 0 and
DA
(Digital Amplitude) = 65,535.
14) Press
OK
softkey (F3) and observe fundamental output.
15) Select second Waveform Number from step 3.
16) Press
ANCH
softkey (F3). Set
AL
(Left Anchor) = 0 and
AR
(Right Anchor) = 1999.
17) Press
OK
softkey (F3).
18) Press
INSF
softkey (F4).
19) Press
SIN
softkey (Fl).
20) Set
P
(Phase) = 0.000 and
N
(Number) = 3.00.
21) Press --> softkey (F 1).
22) Set
DO
(Digital Offset) = 0 and
DA
(Digital Amplitude) = 10,923 (65,535/6).
23) Press
OK
softkey (F3) and observe third harmonic at the output.
24) Press
LAST
key.
25) Press
MATH
softkey (F3).
26) Setup the equation so that the third Waveform Number from step 3 equals the sum of the
first waveform (step 6) and the second waveform (step 15).
27) Press
DO
softkey (F4). Note the resulting output waveform as shown in Figure ???. Also
note the result of the math summing operation is to multiply the signal by 1/2.
28) Press
EDIT
key and perform the following four steps to increase the amplitude to the level
attained in the prior exercise:
29) Press
VRTX
softkey (F2).
30) Press
SCAL
softkey (F2).
31) Set
DO
(Digital Offset) = 0 and
DA
(Digital Amplitude) = 65,535.
32) Press
OK
softkey (F3).
33) Press
FUNC
key.
34) Press
WAV#
softkey (Fl).
35) Select third Waveform Number.
36) Observe the resulting composite waveform at the output.
4-16
Summary of Contents for 2411B
