Tegam 2411B, Operation Manual

Page: 124 / 140

Chapter 8 Advanced Remote Operation
Sequence Generator Operation
Sequence Generator Operation (continued)
Example:
The following command will delete sequence file number 23 (if it exists).
WVFM:SEQ 23
The following commands will create a sequence file (#12) that will sequence waves 3, 1, 5, 8 and 3.
Step 10 will be wave 3 repeated 1 time. Step 20 will be wave 1 repeated 1 time. Step 30 will be wave 5
repeated 1 time. Step 40 will be wave 8 repeated 1 time. Step 50 will be wave 3 repeated 1 time.
AUTO 10,10
WVFM:SEQ 12,3,1,5,8,3
SEQBURST [SEQB] makes a new sequence file, DELETING the existing sequence file if one already
exists. The first parameter is the sequence file to create. The following parameters are pairs, the first
parameter of the pair is the wave number, the second parameter is the burst count (the number of times
the wave is repeated). The AUTO command is used in conjunction with this command.
Example:
The following commands will create sequence file #5. Step 10 will be wave 2 repeated 4 times. Step 20
will be wave 6 repeated 1,000 times. Step 30 will be wave 45 repeated 10,000 times.
AUTO 10,10
WVFM:SEQB 5,2,4,6,1000,45,10000
SEQBURSTNUM [SEQBN] makes a new sequence file, DELETING the existing sequence file if there
is one. The first parameter is the sequence file to create. The following parameters are in triplets. First of
the three is the wave number, second is the burst count (the number of times the wave is repeated), and
the third and last indicates the sequence step number.
Example:
The following command will create sequence file #23. Step 5 will be wave 1 repeated 2 times. Step 10
will be wave 3 repeated 4 times. Step 15 will be wave 5 repeated 6 times.
WVFM:SEQBN 23,1,2,5,3,4,10,5,6,15
8-34