Chapter 4 Waveform Creation System
WaveWorks Pro+ Software (Option)
WaveWorks Pro + Software (Option)
Waveform Creation using optional WaveWorks Pro + software
The following is the abbreviated procedure to illustrate the waveform creation and data download to the
waveform generator using WaveWorks Pro. For detail descriptions and the tutorial, refer to the
WaveWorks Pro + manual.
1. Select
File | New Project
and create a New Waveform.
2. Select
Func | Std
and select one of the 32 standard waveforms.
3. Press Show to view the waveform and
OK
to enter the selected waveform into the New
Waveform.
Download WaveWorks Pro Data using RS-232
Waveform Generator Setup
(See Chapter 7 for more details.)
1. Connect the RS-232 cable supplied by Pragmatic to the waveform generator RS-232 port
and the PC COM port. Make sure each end is connected properly.
2. Set the RS-232 baud rate of the waveform generator to 19200.
WaveWorks Pro Setup
1. Select the Interface menu and set the RS-232 to the proper settling, i.e. 19200,N,8D1S and
Hardware. Press OK button to confirm that the interface is properly connected.
2. Select the
Download | Setup
menu and select
COM1.
Press
OK
.
3. Select the
Download | Go
menu and then select the
WAV#
(download waveform location).
Then, press
OK
.
Download WaveWorks Pro Data using GPIB
Waveform Generator Setup
(See Chapter 7 for more details.)
1. Connect the GPIB cable to the waveform generator GPIB connector and the GPIB connec
tor of the controller (PC).
2. Set the GPIB Address of the waveform generator. (The default address is 16.)
WaveWorks Pro Setup
1. Select the Interface menu. Select the instrument and drag and drop the instrument model to
the proper GPIB address. Press
OK
button to confirm that the interface is properly connect
ed.
2. Select the
Download | Setup
menu and select the proper GPIB address. Press
OK
.
3. Select the
Download | Go
menu and then select the
WAV#
(download waveform location).
Then, press
OK
.
4-20
Summary of Contents for 2411B
