manualshive.com logo in svg
background image

How to use this manual

0-1

How to use this manual

SPECIFICATIONS

1

SERVICE INFORMATION

2

MAINTENANCE

3

TROUBLESHOOTING

4

COVER

5

FUEL SYSTEM

6

GOVERNOR SYSTEM

7

GENERATOR/CHARGING SYSTEM

8

IGNITION SYSTEM

9

STARTING SYSTEM

10

OTHER ELECTRICAL

11

MUFFLER

12

ENGINE REMOVAL/INSTALLATION

13

LUBRICATION SYSTEM

14

CYLINDER

15

CRANKCASE

16

TECHNICAL FEATURES

17

WIRING DIAGRAMS

18

INDEX

The marked sections contain no changes. 
They are not covered in this supplement.

© Honda Motor Co., Ltd.

SERVICE PUBLICATION OFFICE

Date of Issue: May 2012

INTRODUCTION

This supplement covers the construction, function, and 
servicing procedures of the Honda EM10000K1 (SH, 
SKH, LDH type) generators.
For service information that is not covered in this 
supplement, please refer to the EM10000K1/
ET120000K1 base shop manual (part number 
62Z2650).

All information contained in this manual is based on the 
latest product information available at the time of 
printing. We reserve the right to make changes at 
anytime without notice.

No part of this publication may be reproduced, stored in 
a retrieval system, or transmitted, in any form, by any 
means, electronic, mechanical, photocopying, 
recording, or otherwise, without prior written permission 
of the publisher. This includes text, figures, and tables.

As you read this manual, you will find information that is 
preceded by a 

 symbol. The purpose of this 

message is to help prevent damage to this Honda 
product, other property, or the environment.

SAFETY MESSAGES

Your safety and the safety of others are very important. 
To help you make informed decisions, we have 
provided safety messages and other safety information 
throughout this manual. Of course, it is not practical or 
possible to warn you about all the hazards associated 
with servicing these products. You must use your own 
good judgement.

You will find important safety information in a variety of 
forms, including:

· 

Safety Labels – on the product.

· 

Safety Messages – preceded by a safety alert symbol 

 and one of three signal words, DANGER, 

WARNING, or CAUTION. 
These signal words mean:

· 

Instructions – how to service these products correctly 

and safely.

You WILL be KILLED or SERIOUSLY 
HURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLY 
HURT if you don’t follow instructions.

You CAN be HURT if you don’t follow 
instructions.

 

 

 

OUTLINE OF CHANGES

Содержание EM10000K1




























































Отзывы: