Tegam 2411B, Operation Manual

Page: 121 / 140

Chapter 8 Advanced Remote Operation
Arbitrary Sync Pattern Programming - Single Point Sync Query
Combined Waveform and Sync Programming (continued)
With
Sync:
Wvfm Data:
<DAB1>=1, <DAB2>=128, <DAB3>=0,
<DAB4>=1, <DAB5>=128, <DAB6>=1,
<DAB7>=2, <DAB8>=128, <DAB9>=2,
<DAB10>=15, <DAB11>=127, <DAB12>=255.
Single Point Sync Query
WVFM:MEMS?
{<start_addr>}
Returns a single byte in the range of 0 to 15 representing a bit field with weights for SYNC1=1,
SYNC2=2, SYNC3=4, SYNC4=8.
<start_addr> is in the range of 0 to length of waveform -1.
Example:
WVFM:MEMS? 0 1
WVFM:MEMX? {<start_addr>}
Returns a comma separated pair of Sync/Wvfm data. The first value represents the Sync Data (0..15)
and the second value is the signed waveform data (-32768..+32767).
<start_addr> is in the range of 0 to length of waveform -1.
Example :
WVFM:MEMX? 0 1,0
Multiple Point Sync Query
WVFM:MBLKS? {<start_addr>, <nr_of_points>}
Returns the number of Sync byte values as specified in <nr_of_points>. No more than 4096 points can
be requested at the time. The response consist of the <start_address> followed by a comma and the data
in the definite length arbitrary block format.
8-31