Chapter 4 Waveform Creation System
Waveform Creation using Front Panel-Examples
Examples (continued)
8) Press
OK
softkey (F3).
9) Press
INSF
softkey (F4).
10) Press
SIN
softkey (Fl).
11) Set
P
(Phase) = 0.000 and
N
(Number) = 1.00.
12) Press --> softkey (F 1).
13) Set
DO
(Digital Offset) = 0 and
DA
(Digital Amplitude) = 65,535.
(A full-amplitude signal is obtained with DA = 65,535.)
14) Press
OK
softkey (F3). Observe that the fundamental frequency (sin cot) at the waveform
peaks.
15) Press either left or right arrow key.
16) Press
SUMF
softkey (F 1).
17) Press
SIN
softkey (Fl).
18) Set Phase = 0.000 and Number = 3.00.
19) Press --> softkey (Fl).
20) Set
DO
(Digital Offset) = 0 and
DA
(Digital Amplitude) = 10,923.
(Scaling of the amplitude adjusts for the 1/6 amplitude coefficient.)
21) Press
SHOW
softkey (F2) to preview the results and monitor the output for the desired sig
nal. (Care must be exercised to limit the final waveforms to be within the memory limits.)
22) Press
OK
softkey (F3).
23) Observe the resulting composite waveform at the output.
Math Function
1) Press
SETUP
key.
2) Press
WAV#
softkey (Fl).
3) Use existing Waveform Numbers or press
NEW
(F3) and
OK
(F3) softkeys three times to
select three new Waveform Numbers. (As in the previous example, the waveform length is
presumed to be LEN =2000.)
4) Press
EDIT
key.
5) Press
VRTX
softkey (F2).
6) Select first Waveform Number from step 3.
7) Press
ANCH
softkey (F3). Set
AL
(Left Anchor) = 0 and
AR
(Right Anchor) = 1999.
8) Press
OK
softkey (F3).
9) Press
INSF
softkey (F4).
10) Press
SIN
softkey (Fl).
11) Set
P
(Phase) = 0.000 and
N
(Number) = 1.00.
12) Press --> softkey (Fl).
4-15
Summary of Contents for 2411B
