Tegam 2411B, Operation Manual

Page: 34 / 140

Chapter 3 Front-Panel Menu Operation
Parameter Control (continued)
D: FUNC (Function) menu
1: WAV# Select a user-defined arbitrary waveform by the waveform number (0~99).
2: SEQ# Select a user-defined sequence waveform by the sequence number (0~99).
3: STDW Select a standard waveform.
4: VIEW Select the left and right memory addresses to view the waveform memory
contents. You may specify and select ALL, SEG1, SEG2 or SEG3.
Note: The sequence generator option must be installed to select sequence waveforms.
Sequence waveform is not available in burst mode.
D3: STDW (Standard Waveform)
1: SIN (Sine) Select sine wave.
2: SQR (Square) Select square wave.
3: TRI (Triangle) Select triangle wave.
4: SAW+ (S) Select positive-going ramp wave.
5: SAW- (Sawtooth-) Select negative-going ramp wave.
6: DC Select DC level.
7: EXP+ (Expo) Select positive-going exponential wave.
8: EXP- (Exponential-) Select negative-going exponential wave.
9: AM Select AM (Amplitude Modulation) wave.
10: SCM Select SCM (Suppressed Carrier Modulation) wave.
11: FM Select FM (Frequency Modulation) wave.
12: HSIN (Haversine) Select haversine wave.
13: SUN (Sweep Linear) Select linear sweep wave.
14: SLOG (Sweep Log) Select log sweep wave.
15: PLS+ (Pulse+) Select positive-going pulse wave.
16: PLS- (Pulse-) Select negative-going pulse wave.
17: GAUS (Gaussian Pulse) Select Gaussian pulse wave.
18: SX/X (Sine X/X) Select (sine x)/x (or SINC) wave.
19: CIRC (Circular) Select semi-circular wave.
20: NOIS (Noise) Select random noise wave.
3-3
1: WAV# 2: SEQ# 3: STDW 4: VIEW
1: SIN 2: SQR 3: TRI 4: SAW+ 5: SAW- 6: DC 7: EXP+ 8: EXP-
9: AM 10: SCM 11: FM 12: HSIN 13: SLIN 14: SLOG 15: PLS+ 16: PLS-
17: GAUS 18: SX/X 19: CIRC 20: NOIS