Proline Promass F 500 EtherNet/IP
Electrical connection
69
Power
I/O 2
I/O 3
I/O 3
4.
1 2 3 4 5 6 7 8
128
64
32
16
8
4
2
1
IP Address setting
(last octet)
3.
-
+
-
ESC
2.
Power
open
press
open
press
ESC
E
+
-
I/O 4
Power
I/O 2
I/O 3
1.
A0029678
1. Loosen the 4 fixing screws on the housing cover.
2. Open the housing cover.
3. Fold open the terminal cover.
4. Set the desired IP address using the corresponding DIP switches on the I/O
electronics module.
5. Reverse the removal procedure to reassemble the transmitter.
6. Reconnect the device to the power supply.
The configured device address is used once the device is restarted.
Setting the IP address: Proline 500
Risk of electric shock when opening the transmitter housing.
‣
Before opening the transmitter housing:
‣
Disconnect the device from the power supply.
The default IP address may
not
be activated → 71.
1
2
3
4
5
6
7
8
128
64
32
16
8
4
2
1
IP A
ddr
ess se
tting
(las
t
oc
te
t)
A0029635
1. Depending on the housing version, loosen the securing clamp or fixing screw of the
housing cover.
