TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 14 / 240

Preparation and Connection
14
Placement
To ensure proper and safe use of this product, please observe the following.
Prohibited
Do not use in areas exposed to rain and water.
Prohibited
Do not place in areas in which flammable gases are present.
Prohibited
Do not insert any metallic pins, wires, screws, etc. in the front ventilation panels and in the rear fan
motor. Doing so may result in electric shock and/or fire.
Prohibited
This product was designed to be used in stable areas. Do not use or place in areas prone to
vibration.
Improper placement of the power supply may result in damage. Please see below for proper
placement.
How to place:
！
Mandatory
Use only in areas with a room temperature of 0~50 ℃ , humidity of 20~90%RH, and which is absent
of any corrosive gases.
Prohibited
This power supply uses a forced air cooling system. Do not obstruct the front ventilation panels
and rear ventilation discharge opening. If affixing to a rack, attach ventilation panels or others to
the rear of the rack to prevent exhaust from staying inside the rack.
Do not close the front of switch to operate the input power switch "POWER" easily.
！
Mandatory
If using in environment where electric conductive contamination occurs, considerations needs to be
taken such as intaking air using duct.
！
Caution
Using this product near receivers (radios, televisions, etc.) may interfere with reception.
！
WARNING
！
CAUTION
！
CAUTION