TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 8 / 240

About this machine
8
Part Names and Functions
Front Panel (Comon to all models)
1 2 3 4 5 6 7
8 35
①
. VOLTAGE
Voltage Setting/Selection Dial
Selects the voltage, the OVP, and various other parameters.
Press the dial to change the settings number place.
② . CURRENT
Current Setting/Selection Dial
Selects the current, the OCP, and various other parameters.
Press the dial to change the settings number place.
③
. OUTPUT
Output ON/OFF Toggle Key
Toggles output ON/OFF.
The factory default setting for the output, after inserting power,
is OFF.
Lights when the output is set to ON.
④
. MEMORY
Memory Display/Settings Key
Saving and loading can be done for the panel setting status with
keys "A", "B", and "C". Also, depending on the Function item
setting, this can be used to select One-Action or Two-Action
loading method.
⑤
. LOCK
LOCK Key
Locks panel from use.
Lights when Lock has been enabled.
Below are the 3 types of Lock settings. They can be changed by
each function setting key (FUNC.).

Locks everything but the LOCK key

Locks everything but the OUTPUT and LOCK key

Locks only the Voltage/Current Dial, PRESET,
and FUNC. keys.
⑥ . LOCAL
LOCAL Key
Switches between “LOCAL”, operated from the panel, and
“REMOTE”, operated by control via serial data communication.
⑦
.FUNC.
Function Key
Used for setting various functions
Lights when Function settings are available.
⑧
.POWER
Input Power Switch
Toggles power ON/OFF
㉟ ． Handle for Rack Mounting
Handles are used for fixing this equipment to the rack.
Do not carry this equipment with these handles.