TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 108 / 240

Using via Digital Data Communication
108
SYSTem:ERRor
:Reads Error Message
Function: After an error response is received, send this command to retrieve the cause for the generated error
Format: SYSTem:ERRor?
Type: QUERY command only
Response: Error Code, Error Message
Table-Error Codes & Error Messages
Error Code Error Messages Meaning
0 None Normal
-100 Command error Command Error (Undefined Command, etc.)
-101 Invalid character Invalid character sent
-102 Syntax error Syntax error
-104 Data type error Data type error
Character received instead of numeral in parameter, etc.
-108 Parameter not allowed Too many parameters
-109 Missing parameter Too few parameters
-120 Numeric data error Numerical data error. Exceeds range, etc.
-140 Character data error Character data error
-150 String data error String data error
-902 No permission Command. Command not permitted to execute.
-903 Receive time out. Receive time out
-905 Unmount isolate option board Cannot execute since the isolation option board is
unmounted
<Ex.>
SYST:CONT:CURR:ISOL?
ERROR
SYST:ERR?
-905,Unmount isolate option board
Can only be used for the last generated error response (newest error).
！
CAUTION