TAKASAGO HX-S-01000-12G2, Instruction Manual

Page: 159 / 240

Controlling with External Analog & Contact Signals
159
Status Output
This can externally output the operational status of the HX-S-G2 Series power supply.
Output Circuit
Output is given by an open collector insulated by a photocoupler.
LEVEL1_ALM
LEVEL2_ALM
CV_STS
CC_STS
P-ON(M)_STS
S-COM
In
te
rn
a
l C
irc
u
it
Insulation Control Connector (Accessory)
11
12
13
14
15
16
Status List
Output signal is negative logic. When output signal is ON between the collector and emitter, logic is 1.
See the following for details on each terminal’s signals.
Terminal Signal Name Contents
11
LEVEL1_ALM
Light failure (OVP, OCP) has occurred.
OUTPUT ON/OFF STS
“OUT PUT ON/OFF”has occurred.
12 LEVEL2_ALM Alarm has occurred.
(Include Several Alarms)
13 CV_STS Running in Constant Voltage Mode.
14 CC_STS Running in Constant Current Mode.
15 P-ON(M)_STS Internal rectification voltage and power supply for control circuits is
normal.
16 S-COM Status Common.
Connected to emitters of each photocoupler.
Status Output Electric Specifications
Item Specifications
Withstand Voltage DC 1500V (for input, output, and chassis)
Max. Collector Voltage 24V
Max. Collector Current 5mA
 By connecting the external control connector (accessory) No. 12 and 25, the logic of
LEVEL1_ALM becomes a positive logic.
 By connecting the external control connector (accessory) No. 13 and 26, the logic of
LEVEL2_ALM becomes a positive logic.
MEMO

which is attached to the
Isolated Control of the main
body.